The CM-232 communication module provides an RS-232 interface to almost any RS-232 enabled device. It attaches to an RTI control system on one end, and a device’s DB-9 serial port connector on the other end. The CM-232 is capable of one-way transmission (no receive function is supported) of user-defined character or binary strings. These character strings, as well as the baud rate, parity, and bit structure are programmed using RTI’s TheaterTouch Designer software package.Key Features• Connects to the output ports of the RP-6 or the XP-8• Allows the RP-6 or XP-8 to send commands to almost any RS-232 enabled device• Software-selectable baud rate up to 115.2K (depending on control system)• Industry-standard DB-9 male connector• No power supply required - Power is supplied by the output ports• User-definable output strings using TheaterTouch Designer softwareSpecificationsBaud Rate......................................................................... Software Selectable.............................................................(Depends on attached control system)Cable Length........................................................................... 12 Feet (3.7 m)Connector........................................................................................ DB-9 MalePins Used.............................................................. GND, TXD, DTR (tied high)Dimensions (W x H x D)...................... 1.3” (33mm) x .5” (14mm) x 2” (51mm)Warranty................................................................... One Year (Parts & Labor)